Products

Electro Hydraulic braking

C F Series Accumulator Charge Valve (Standard Version)

C F Series Accumulator Charge Valve (Standard Version)

The CF series accumulator charge valve is designed for use in open hydraulic systems and is installed between the pump and downstream secondary hydraulic devices, such as power steering control valves and cylinders installed in the same hydraulic circuit.

MORE
GET IN TOUCH
LH Series Crane Handle Valve

LH Series Crane Handle Valve

The Crane Handle Valve Single Circuit is designed for use in quantitative systems, closed systems or load sensitive systems. When used in conjunction with the accumulator charging valve and a suitable accumulator, the service handle valve can provide regular braking and emergency braking after power failure.

MORE
GET IN TOUCH
LP Series Parking Handle Valve

LP Series Parking Handle Valve

The parking handle valve is designed for use in dosing systems, closed systems or load sensitive systems, with an accumulator charging valve and a suitable accumulator, to operate the parking brake manually.

MORE
GET IN TOUCH
PC Series Valve Driver

PC Series Valve Driver

Valve driver programming works in conjunction with electronic pedals and electro-hydraulic proportional brake valves. The valve driver can realize dual redundant control, provide pulse width modulation current control output, and drive the electro-hydraulic proportional brake valve. Provides flutter current to optimize the performance of the electro-hydraulic brake system. The maximum current is adjustable, allowing the maximum brake pressure to be set at the maximum travel of the electro.

MORE
GET IN TOUCH
EH series electro-hydraulic proportional brake valve-coal safety explosion-proof type

EH series electro-hydraulic proportional brake valve-coal safety explosion-proof type

Electro-hydraulic proportional brake valve is a full power valve, the maximum output pressure can reach 207bar, proportional to the input current.

MORE
GET IN TOUCH
EP series electronic pedal

EP series electronic pedal

The electronic pedal is designed for use in electro-hydraulic proportional braking systems and/or electronic throttle control systems. The pedal feedback force is proportional to the rotation angle of the pedal. The angle sensor outputs one or more sets of signals, and the size of the output signal is proportional to the pedal rotation angle. A variety of pedal configurations and sensing options are available.

MORE
GET IN TOUCH
RV series relay valve

RV series relay valve

Relay valves are designed for use in quantitative systems, closed systems or load sensitive systems. When used in conjunction with an accumulator charging valve and a suitable accumulator, the relay valve can provide regular braking and emergency braking after power failure.

MORE
GET IN TOUCH
Matching Harness

Matching Harness

The matching wire harness is used to meet the different requirements of customers for the interface of electrical related products of the Navix brake system, and the connector wire harness of common brands in the market is customized.

MORE
GET IN TOUCH
DE series two-way electro-hydraulic proportional brake valve-with coal safety explosion-proof type

DE series two-way electro-hydraulic proportional brake valve-with coal safety explosion-proof type

Electro-hydraulic proportional brake valve is a full power valve, the maximum output pressure can reach 207bar, proportional to the input current. Mainly used in electronically controlled braking system, remote control braking system, unmanned braking system, anti-skid braking system, traction control system, etc.

MORE
GET IN TOUCH
SA Series Parking Brake Cylinder

SA Series Parking Brake Cylinder

The parking brake cylinder is an oil cylinder that releases the hydraulic pressure of the spring brake. It is often combined with a mechanical brake to realize the emergency braking action after the parking brake or power failure through hydraulic control.

MORE
GET IN TOUCH
CF series multifunctional accumulator charging valve-coal safety explosion-proof type

CF series multifunctional accumulator charging valve-coal safety explosion-proof type

The CF series multifunctional accumulator charging valve is designed for use in open hydraulic systems and is installed between the pump and downstream secondary hydraulic devices, such as power steering control valves and cylinders installed in the same hydraulic circuit.

MORE
GET IN TOUCH
SV series solenoid valve-including coal safety explosion-proof type

SV series solenoid valve-including coal safety explosion-proof type

Solenoid valve is designed for quantitative system, closed system or load sensitive system, with the accumulator charging valve and the appropriate accumulator to achieve the vehicle parking brake and power failure after the emergency brake.

MORE
GET IN TOUCH
PL Series Pressure Limiting Valve

PL Series Pressure Limiting Valve

Pressure limiting valves are designed for use in quantitative, closed or load-sensitive systems. Commonly used in the system pressure is high but the equipment under low pressure conditions.

MORE
GET IN TOUCH
ME series flashlight integrated parking brake valve-including coal safety explosion-proof type

ME series flashlight integrated parking brake valve-including coal safety explosion-proof type

The flashlight integrated parking brake valve is designed to be used in quantitative system, closed system or load sensing system. It cooperates with accumulator charging valve and suitable accumulator to realize parking brake and emergency brake after power failure of the vehicle. Commonly used in mine safety and coal safety vehicles.

MORE
GET IN TOUCH
CFB Series Large Flow Accumulator Charging Valve

CFB Series Large Flow Accumulator Charging Valve

The CF series accumulator charge valve is designed for use in open hydraulic systems and is installed between the pump and downstream secondary hydraulic devices, such as power steering control valves and cylinders installed in the same hydraulic circuit. The accumulator charging valve requires oil from the quantitative pump to charge the accumulator as required, completes at a set flow rate under a set pressure, and remains constant within a set pressure range.

MORE
GET IN TOUCH
< 1 >

Messages Board

Fill out the form below and we will be in touch as soon as possible.

SUBMIT
%{tishi_zhanwei}%

Products

Contact Us

Sarah Ren

(Sales Manager)

Tel / Whatsapp / WeChat

+86-13869088831

E-mail

Sarah@navix-tech.com

Jason Guo

(Marketing Manager)

Tel / Whatsapp / WeChat

+86-13051138385

E-mail

Jason@navix-tech.com

Frank Zhou

(Tech Manager)

Tel / Whatsapp / WeChat

+86-13563109078

E-mail

Frank@navix-tech.com

E-mail

info@navix-tech.com

Tel / Whatsapp / WeChat

Sarah Ren:+86-13869088831

Jason Guo:+86-13792715197

Frank Zhou:+86-13563109078

Business License

Powered by www.300.cn