HOME
ABOUT US
PRODUCTS
APPLICATION
BLOG
DOWNLOAD
CONTACT US
Products
CATEGORY
Brake system accessories
Positive braking system
Electro Hydraulic braking
Reverse braking system
Load sensitive braking system
Slow control system
Pressure sensor
Lequid-filled system
Contact Us
Sarah Ren(Sales Manager)
Tel / Whatsapp / WeChat
+86-13869088831
E-mail
Sarah@navix-tech.com
Jason Guo(Marketing Manager)
+86-13051138385
Jason@navix-tech.com
Frank Zhou (Tech Manager)
+86-13563109078
Frank@navix-tech.com
info@navix-tech.com
C F Series Accumulator Charge Valve (Standard Version)
The CF series accumulator charge valve is designed for use in open hydraulic systems and is installed between the pump and downstream secondary hydraulic devices, such as power steering control valves and cylinders installed in the same hydraulic circuit.
LH Series Crane Handle Valve
The Crane Handle Valve Single Circuit is designed for use in quantitative systems, closed systems or load sensitive systems. When used in conjunction with the accumulator charging valve and a suitable accumulator, the service handle valve can provide regular braking and emergency braking after power failure.
LP Series Parking Handle Valve
The parking handle valve is designed for use in dosing systems, closed systems or load sensitive systems, with an accumulator charging valve and a suitable accumulator, to operate the parking brake manually.
PC Series Valve Driver
Valve driver programming works in conjunction with electronic pedals and electro-hydraulic proportional brake valves. The valve driver can realize dual redundant control, provide pulse width modulation current control output, and drive the electro-hydraulic proportional brake valve. Provides flutter current to optimize the performance of the electro-hydraulic brake system. The maximum current is adjustable, allowing the maximum brake pressure to be set at the maximum travel of the electro.
EH series electro-hydraulic proportional brake valve-coal safety explosion-proof type
Electro-hydraulic proportional brake valve is a full power valve, the maximum output pressure can reach 207bar, proportional to the input current.
EP series electronic pedal
The electronic pedal is designed for use in electro-hydraulic proportional braking systems and/or electronic throttle control systems. The pedal feedback force is proportional to the rotation angle of the pedal. The angle sensor outputs one or more sets of signals, and the size of the output signal is proportional to the pedal rotation angle. A variety of pedal configurations and sensing options are available.
RV series relay valve
Relay valves are designed for use in quantitative systems, closed systems or load sensitive systems. When used in conjunction with an accumulator charging valve and a suitable accumulator, the relay valve can provide regular braking and emergency braking after power failure.
Matching Harness
The matching wire harness is used to meet the different requirements of customers for the interface of electrical related products of the Navix brake system, and the connector wire harness of common brands in the market is customized.
DE series two-way electro-hydraulic proportional brake valve-with coal safety explosion-proof type
Electro-hydraulic proportional brake valve is a full power valve, the maximum output pressure can reach 207bar, proportional to the input current. Mainly used in electronically controlled braking system, remote control braking system, unmanned braking system, anti-skid braking system, traction control system, etc.
SA Series Parking Brake Cylinder
The parking brake cylinder is an oil cylinder that releases the hydraulic pressure of the spring brake. It is often combined with a mechanical brake to realize the emergency braking action after the parking brake or power failure through hydraulic control.
CF series multifunctional accumulator charging valve-coal safety explosion-proof type
The CF series multifunctional accumulator charging valve is designed for use in open hydraulic systems and is installed between the pump and downstream secondary hydraulic devices, such as power steering control valves and cylinders installed in the same hydraulic circuit.
SV series solenoid valve-including coal safety explosion-proof type
Solenoid valve is designed for quantitative system, closed system or load sensitive system, with the accumulator charging valve and the appropriate accumulator to achieve the vehicle parking brake and power failure after the emergency brake.
PL Series Pressure Limiting Valve
Pressure limiting valves are designed for use in quantitative, closed or load-sensitive systems. Commonly used in the system pressure is high but the equipment under low pressure conditions.
ME series flashlight integrated parking brake valve-including coal safety explosion-proof type
The flashlight integrated parking brake valve is designed to be used in quantitative system, closed system or load sensing system. It cooperates with accumulator charging valve and suitable accumulator to realize parking brake and emergency brake after power failure of the vehicle. Commonly used in mine safety and coal safety vehicles.
CFB Series Large Flow Accumulator Charging Valve
The CF series accumulator charge valve is designed for use in open hydraulic systems and is installed between the pump and downstream secondary hydraulic devices, such as power steering control valves and cylinders installed in the same hydraulic circuit. The accumulator charging valve requires oil from the quantitative pump to charge the accumulator as required, completes at a set flow rate under a set pressure, and remains constant within a set pressure range.
SH series reverse regulating brake valve
The reverse adjustment brake valve is designed to control the reverse brake system spring brake/hydraulic release service brake. The technical term "reverse regulation" is used because the brake valve controls the brake to implement braking by reducing the pressure. In a reverse brake system, the set pressure of the brake valve must be maintained above the brake full release pressure to ensure that brake drag does not occur.
MP series electronically controlled parking emergency brake valve group-including coal safety explosion-proof type
The electrically controlled parking brake valve group is designed to control the parking brake and is installed between the accumulator and the parking brake. When the solenoid valve loses power, the parking brake is in the braking state; when the solenoid valve is energized, the parking brake is in the release state.