The management of technological processes in any field of activity, such as manufacturing, the automotive industry or off-highway areas, it is necessary to control the fluid pressure of the operating system. This requires associating a specific pressure value that is important for the system with an electrical signal, such as running a machine cycle or indicating a specific situation (leak, alarm, etc.). These operations may be controlled using a pressure sensor that is a pressure switch that is
Product Details
Product Features
• pressure setting range: 1 ~ 207bar
• electrical power: 100VA Max (recommend current less than 2A)
• set point accuracy: set point 5% ~ 20%, change due to pressure range
• fluid wetted part material: diaphragm EPDM (low temperature nitrile rubber)
• Housing Material: Galvanized Steel
• electrical terminal: IP66(IP cap)
• recommend temperature range:-40 ℃ ~ 110 ℃
• pressure: 6000PSI(414bar), static pressure
• certification: CE (maximum voltage does not exceed 42VDC)
• weight: 0.06KG
• recommend torque value (G1/4):19 ~ 20N/m
Note:
• temperature and aging affect set point
• switch can be changed under the influence of temperature.
• the switch can work at the standard low temperature, the set point and dead zone will increase, and the fluid viscosity will even cause delayed response.
• switch can be changed under the influence of temperature.
• Oil port design shall follow GB/T19674.2
• All dimensions are for reference only
• products can be applied to gas medium, but there will be a small amount of leakage, can not be applied to toxic, flammable, explosive gas device.